FLuent

January 10, 2002, 10:05

I am a new Fluent user ; I need main guid lines, which program from the backage is used to genarate mish and which is used later.

January 10, 2002, 12:50

GAMBIT is used for creating basic geometry & meshing. Then FLUENT is used.

January 12, 2002, 11:28

I tryied to install gambit but an error message appears that which look like " can not find x server for EXCEED" I use win me , I thought EXCEED backage is required ,When I install it I recive other message saying "it works only under win NT"

How can I solve this problem?

thanks

January 12, 2002, 11:36

I was told when I got Fluent that it did not run on 98 or ME, or at least fluent would not support it. I had ME and had to reinstall my operating system to 2000 professional.

I don't think there is anything you can do; you will have to have one of the supported operating systems.

Cheers

Andy

January 12, 2002, 17:18

Install Exceed 6.0 !!!

Cheers

January 13, 2002, 05:38

Install X-Win32.

January 10, 2002, 10:05	FLuent	#1
M. Essuri Guest Posts: n/a	I am a new Fluent user ; I need main guid lines, which program from the backage is used to genarate mish and which is used later.

January 10, 2002, 12:50	Re: FLuent	#2
Sharad Dugad Guest Posts: n/a	GAMBIT is used for creating basic geometry & meshing. Then FLUENT is used.

January 12, 2002, 11:28	Re: FLuent	#3
M. Essuri Guest Posts: n/a	I tryied to install gambit but an error message appears that which look like " can not find x server for EXCEED" I use win me , I thought EXCEED backage is required ,When I install it I recive other message saying "it works only under win NT" How can I solve this problem? thanks

January 12, 2002, 11:36	Re: FLuent	#4
Andrew PArker Guest Posts: n/a	I was told when I got Fluent that it did not run on 98 or ME, or at least fluent would not support it. I had ME and had to reinstall my operating system to 2000 professional. I don't think there is anything you can do; you will have to have one of the supported operating systems. Cheers Andy

January 12, 2002, 17:18	Re: FLuent	#5
Johnix Guest Posts: n/a	Install Exceed 6.0 !!! Cheers

January 13, 2002, 05:38	Re: FLuent	#6
Sharad Dugad Guest Posts: n/a	Install X-Win32.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stopping a Fluent batch job AND saving the data! Possible?	Volker Pawlik	FLUENT	13	December 28, 2020 04:16
A Problem of Fluent Interpreted UDF: parse error	knight	Fluent UDF and Scheme Programming	25	August 16, 2018 10:26
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
Compared MRFSimpleFoam and Fluent in a centrifugal pump!	renyun0511	OpenFOAM Running, Solving & CFD	8	July 6, 2010 06:24
Problems in lauching FLUENT	Lourival	FLUENT	3	January 16, 2008 16:48