CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

More GAMBIT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 15, 2002, 04:05
Default More GAMBIT
  #1
Christian
Guest
 
Posts: n/a
Hi.

When meshing with the Coopet tool, the Gambit online manual have an example on how to mesh a combination of a cylinder, a box and a "corner". The operation is divided in 4 steps. Step no.2 is an imprint of the source faces onto each other.

My question is how this imprint is done. Is it done just by selecting the source faces or is there a special command that should be used (if yes: there is this command; I cannot find it).

Thanks

Christian
  Reply With Quote

Old   January 15, 2002, 18:35
Default Re: More GAMBIT
  #2
Erwin
Guest
 
Posts: n/a
Done automatically after you select the source faces
  Reply With Quote

Old   January 16, 2002, 03:54
Default Re: More GAMBIT
  #3
Christian
Guest
 
Posts: n/a
Ok. Thank you.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 07:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 13:39
Does Gambit has a maximum allowable grid number? spartan1516 ANSYS Meshing & Geometry 7 March 25, 2010 10:08
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
Problem starting Gambit ViHAR MALViYA FLUENT 0 November 10, 2006 11:26


All times are GMT -4. The time now is 04:42.