CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem with DPM iteration

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 30, 2002, 09:35
Default Problem with DPM iteration
  #1
Jacek
Guest
 
Posts: n/a
Hello,

I writting to you, because of problems with Fluent and some calculations. During parallel process my PC (2 GB of RAM, 40 GB HDD and two PIII 733 MHz) under linux Red Hat 6.2 and Fluent 5.5 works ok until it must to calculate DPM. When it does it after few seconds is infotmation as follows:

"Primitve Error at Node 0: prf_all_to_one_scend_real: out of memory"

and it stacks. Have you any ideas how to fix this problem? Help, please.
  Reply With Quote

Old   January 30, 2002, 18:51
Default Re: Problem with DPM iteration
  #2
Daniel Suasnabar
Guest
 
Posts: n/a
Maybe the number of particles for the DPM calculation is to large. Try with smaller number of particles.
  Reply With Quote

Old   January 31, 2002, 04:19
Default Re: Problem with DPM iteration
  #3
Jacek
Guest
 
Posts: n/a
I started to calculate the same case on two different computers and on second one calculations go ok and it didn't stack. The number of particles in these two cases is same. The question is is my PC with PIII is not so enough to calculate DPM or should I try to reconfigure it (I mean linux and than fluent)?
  Reply With Quote

Old   January 31, 2002, 06:13
Default Re: Problem with DPM iteration
  #4
Daniel Suasnabar
Guest
 
Posts: n/a
The problem may be related to Fluent as your computer's RAM appears to be OK (assuming that the red hut Linux is OK). Maybe you should try to reconfigurate/reinstall Fluent. On the other hand Fluent may have a bug for the combination of computer/operating system you are using. I had similar problems long time ago with Alpha machines operating with NT. The same problem was OK for Unix system.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
DPM model problem wwa FLUENT 7 May 4, 2010 10:26
DPM Time since last iteration sega Fluent UDF and Scheme Programming 0 February 25, 2010 06:52
Problem with DPM Michele Vascellari FLUENT 2 November 17, 2008 13:42
DPM injection problem akr FLUENT 5 November 6, 2006 11:34
Problem with DPM model cwflying FLUENT 5 January 31, 2003 12:25


All times are GMT -4. The time now is 01:18.