CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Mixsim with Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 18, 2002, 23:10
Default Mixsim with Fluent
  #1
moiami
Guest
 
Posts: n/a
Hi,

I'm using Mixsim v1.7 as preprocesesor. My problem description: batch stirred tank with radial impeller. As there is a problem with the Fluent license, I cannot utilise Fluent v4.5 to run together with Mixsim.

What I did was: I generated a Fluent v5 case file, close Mixsim and then run the case file with Fluent v5.5. My BC was Fluid = 0 r/s whereas impeller and rotating shaft is relative to fluid = 1 r/s.

But I couldn't get the profile (I tried with Mixsim Tutorial 4) stated in the tutorial. What I got was a lot of stagnant region occupying the space.

Could anybody tell me how to simulate a stirred tank (there is no Fluent tutorial on that topic) or if anyone has done a similar problem I'd be grateful if he/she shares the techniques with me.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 27 February 6, 2018 04:34
fluent parallel problem in win7 x64 system dunga82 FLUENT 8 April 19, 2012 21:23
What the differences flow equation of Fluent 6.3 and Fluent 12.1 opehterinar81 FLUENT 0 August 19, 2011 12:55
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 03:44
why can't i examine the results after iteration in fluent Mixsim 2.0? xiqiu FLUENT 0 September 11, 2009 05:21


All times are GMT -4. The time now is 07:41.