|
[Sponsors] |
April 23, 2002, 11:27 |
Multiphase Model
|
#1 |
Guest
Posts: n/a
|
I have a circular pipe with a hot liquid at elevated temperature and pressure. The flow passes a restriction and the pressure drops to well below the vapour pressure of the liquid. As a result water vapour is produced and two phase flow develops.
Is the Cavitation model suitable for this type of problem with high vapour fractions? Can the mass and energy transfer between phases be modelled with Fluent? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |
mass balance problem in multiphase model | mdsanij1 | FLUENT | 0 | July 28, 2009 16:01 |
Multiphase model and species transport | Reginaldo Cotto | FLUENT | 0 | August 29, 2006 20:36 |
multiphase model & separation | naser | FLUENT | 5 | June 9, 2006 06:12 |