CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Is it possible to use source terms for .....????

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 7, 2002, 14:19
Default Is it possible to use source terms for .....????
Sharad Dugad
Posts: n/a
Hi all,

(1)Can I use an edge of a fluid continum face as inlet using "Source term" option in 'Fluid' panel?

Fluent Manual suggests use of this for a tiny element/cell.

(2)If the ans. to (1)is yes, then how to calculate the mass & momentum sources for the edge which is in the X direction(parallel to X-dir)? Shall I have to input X-momentum source or Y-momentum?

Als, How to specify K and epsilon for the same?

I am using Fluent 5.5 for 2-D model.

Waiting for help. Thanx in advance.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 16:02
wmake compiling new solver mksca OpenFOAM Programming & Development 13 August 18, 2014 22:26
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 01:24
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 17:51

All times are GMT -4. The time now is 08:54.