CFD Online Logo CFD Online URL
Home > Forums > FLUENT

about the mesh of gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 27, 2002, 04:51
Default about the mesh of gambit
Posts: n/a
hello, i am a new user of fluent, now i have trouble with meshing 3d volumes. there is one brick as combustion chamber and is connected with some cylinders as burner. i unite them as one volume, and then split them . but i can not mesh the volumes, i will be very grateful for any suggestions,
  Reply With Quote

Old   August 27, 2002, 07:50
Default Re: about the mesh of gambit
Posts: n/a
Try meshing the faces before meshing the volumes! Are you looking for Hex mesh or any mesh would do? For hex mesh you have to divide the volumes into small volumes those can be either meshed using mapped/submapped or cooper meshing. Similarly you can mesh the volumes using tetra meshes.

Hope this helps! Ashu
  Reply With Quote

Old   August 28, 2002, 00:20
Default Re: about the mesh of gambit
Posts: n/a
thank you very much,dear friend, i will try!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10
Successive Mesh in Gambit ashish FLUENT 0 April 28, 2006 00:42
How to mesh a circle by Gambit? Zhengcai Ye FLUENT 5 March 24, 2006 02:04
Mesh import from gambit Kaushik Balakrishnan (Balakrishnan) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 5 April 21, 2005 13:42

All times are GMT -4. The time now is 07:57.