CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

HELP! FIDAP convergence problem!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 30, 2002, 23:16
Default HELP! FIDAP convergence problem!
Posts: n/a
When i finished the run of a transient filling simulation, the desired TEND=3 ,i got the message : solution converged in 6 iterations at time step 1 the time step 1 corresponding to the time=0.02s the last time step=3.0s i can not plot any convergence data at time step=3.0s although i can plot at time =0.02s. Does it mean it has not converged at time=3.0s? How about the intermediate results?such as time=1s,2s etc.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
convergence problem commonyue Main CFD Forum 1 December 1, 2009 04:54
Submerged fin, Convergence problem supermouniette FLUENT 10 July 6, 2009 10:47
Convergence of CFX field in FSI analysis nasdak CFX 2 June 29, 2009 01:17
CONVERGENCE PROBLEM - oil boiler MM FLUENT 1 February 15, 2007 06:24
Non Convergence of 3D Heat transfer cfd problem Balraj Main CFD Forum 3 December 9, 2004 01:24

All times are GMT -4. The time now is 07:50.