HELP! FIDAP convergence problem! -- CFD Online Discussion Forums

November 30, 2002, 22:16	HELP! FIDAP convergence problem!	#1
Carl Guest Posts: n/a	When i finished the run of a transient filling simulation, the desired TEND=3 ,i got the message : solution converged in 6 iterations at time step 1 the time step 1 corresponding to the time=0.02s the last time step=3.0s i can not plot any convergence data at time step=3.0s although i can plot at time =0.02s. Does it mean it has not converged at time=3.0s? How about the intermediate results?such as time=1s,2s etc.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
convergence problem	commonyue	Main CFD Forum	1	December 1, 2009 03:54
Submerged fin, Convergence problem	supermouniette	FLUENT	10	July 6, 2009 10:47
Convergence of CFX field in FSI analysis	nasdak	CFX	2	June 29, 2009 01:17
CONVERGENCE PROBLEM - oil boiler	MM	FLUENT	1	February 15, 2007 05:24
Non Convergence of 3D Heat transfer cfd problem	Balraj	Main CFD Forum	3	December 9, 2004 00:24

All times are GMT -4. The time now is 19:39.