CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 18, 2002, 12:15
Default Symmetry
Posts: n/a
I tried to build a simple square pipe with Gambit, and then in FLUENT, put in boundary conditions at the inlet (fixed total pressure) and at the outlet (fixed static pressure).

I had expected the filled-in plots of my results to be symmetrical on all four faces of my pipe, but they are not! There were no energy equations used, nor gravity, so I don't understand why I get different values for each of the four faces.

Does anyone know what I could have possibly done wrong? Does the axis along which I defined my square pipe have anything to do with it (e.g. -x-y-z or +x-y+z etc)?

  Reply With Quote

Old   December 18, 2002, 18:24
Default Re: Symmetry
Amid Naz
Posts: n/a
did u define the 4 walls BC indentically? I guess no reason to have different results unless u made some mistake here or there..I suggest to repeat the problem from scrach, it is easy and can be redone fastly, GOOD LUCKK
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Blocking and Symmetry BrolY ANSYS Meshing & Geometry 32 August 24, 2012 03:13
Properly using symmetry with both CFX and ANSYS workbench for a FSI analysis, help! Cirion0000 CFX 0 July 6, 2009 14:26
Forces in Symmetry Matt CFX 2 February 25, 2009 06:41
Symmetry plane error in solver Santiago Orrego. CFX 6 January 31, 2007 08:09
radiation and symmetry Mark FLUENT 2 November 4, 2004 14:50

All times are GMT -4. The time now is 06:40.