CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Need help on GAMBIT

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 20, 2002, 13:39
Default Need help on GAMBIT
Parshant Dhand
Posts: n/a
Hi there, i need some help to use FLUENT. I want to draw a geometry in which there is one cylinder, which is vertical and then on the outer face of this vertical cylinder there is another cylinder which is horizontal. I tried many ways but could not get it. the two cylinders are joined and the fluid flows from vertical cylinder to this horizontal cylinder.please comeone help.
  Reply With Quote

Old   December 20, 2002, 13:47
Default Re: Need help on GAMBIT
Posts: n/a
Try gambit Tutorial No.3
  Reply With Quote

Old   December 20, 2002, 16:00
Default Re: Need help on GAMBIT
Eric R.
Posts: n/a

Draw the two cylinders in the fashion you described, where they overlap. Then you can either 1) "split" one volume from the other, OR 2) "unite" the two volumes.

Review that tutorial the first person mentioned. Any questions, feel free to ask.


  Reply With Quote

Old   January 3, 2003, 05:29
Default Re: Need help on GAMBIT
Posts: n/a
Draw verticle one first and then horizontal one. If dia same then place the second one as the center line touches the outer face of first one then unite. and if the dias r not same then place as the first one ocupy the most of the face.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
3-D Mesh Check in Gambit..... SHR FLUENT 4 March 25, 2003 04:10
Generating big meshes with GAMBIT on NT Andrew Ooi FLUENT 12 February 2, 2000 23:26

All times are GMT -4. The time now is 06:26.