CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Boundry Conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 10, 2003, 03:31
Default Boundry Conditions
  #1
Parshant Dhand
Guest
 
Posts: n/a
In Gambit i am only able to define the type of boundary, if it is velcoity inlet or outlet or wall or whatever, how can i give values to these entities in GAMBIT. And if not in GAMBIT then how can i do it in FLUENT, because in FLUENT when i click on BOundary COnditions under define, the B.C, window does not open at all.
  Reply With Quote

Old   January 10, 2003, 08:54
Default Re: Boundry Conditions
  #2
Chris
Guest
 
Posts: n/a
You cannot assign the specific values of the boundaries in GAMBIT, though you can only specify the type, or ZONE (as you have already found out).

It's a good practice to specify your ZONES in Gambit before you export your model to FLUENT. After you have loaded your model into FLUENT, when you click on Boundary conditions, you should have a window open. It displays the different zones in your model and the type of zones that they are (as pre-defined by the user in Gambit).

Double-clicking on the zones should open up another window, in which you can enter specific values like 300K or 1.57 kg/s etc.
  Reply With Quote

Old   January 10, 2003, 21:25
Default Re: Boundry Conditions
  #3
Alamgir
Guest
 
Posts: n/a
If the window does not come up that means u export the mesh before specify bc. So export it again and see the zone in the file when it is opening in the FLUENT console window like wall, inlet, and outlet etc.

Alamgir
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D airfoil boundry conditions sarat FLUENT 1 July 15, 2009 09:09
selection of model &setting boundry conditions rajesh FLUENT 0 March 2, 2008 09:22
Boundry conditions!!!! Zaher CFX 2 March 16, 2004 10:25
Boundry Conditions Parshant Dhand FLUENT 2 January 10, 2003 21:18
Non constant boundry conditions Mounir FLUENT 1 February 14, 2001 09:05


All times are GMT -4. The time now is 04:53.