|
[Sponsors] |
January 27, 2003, 09:24 |
Error message when setting BC
|
#1 |
Guest
Posts: n/a
|
Hello, me and my famous workmate have an interesting error message when opening a continuum BC (solid zone):
Error: GENERAL-CAR-CDR: invalid argument [1]: improper list Error Object: #f ????? |
|
January 28, 2003, 14:07 |
Re: Error message when setting BC
|
#2 |
Guest
Posts: n/a
|
I would like to know as well. I get the same error message but only when I activate the energy equation and try to open the solid zone BC.
|
|
January 28, 2003, 14:33 |
Re: Error message when setting BC
|
#3 |
Guest
Posts: n/a
|
It means that a field in your window has not been set (it has the value #f = empty). I saw it, e.g. in a porous zone where the solid material was not set after I read a case file from one old version of Fluent into a new one. In stead of Aluminum or so the field is empty.
So, check all your fields very carefully to see if they make sense. |
|
January 28, 2003, 15:18 |
Re: Error message when setting BC
|
#4 |
Guest
Posts: n/a
|
I'm trying to specify a fixed temperature in a solid and it won't let me. I don't know what fields I should be looking at to determine why the message is occuring.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 21:58 |
Sover setting with TUI | junbbung | FLUENT | 0 | August 20, 2009 00:43 |
LiftDrag utility from v12 to v141 | cfdphil | OpenFOAM Running, Solving & CFD | 2 | December 5, 2007 05:49 |
Ultra high temperature? | bk | Siemens | 2 | July 19, 2005 00:01 |
Warning 097- | AB | Siemens | 6 | November 15, 2004 04:41 |