CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Fluent - mulitple displays simultaneously?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 13, 2003, 12:01
Default Fluent - mulitple displays simultaneously?
Posts: n/a

I'm using Fluent (version 6.0). After iterating a 3D model of airflow around a body, I can display pressure contours (e.g. on the surface of the body) or particle tracks around the body. Does anybody know if it is possible to display both of these simultaneously, i.e. get a 3D picture of the body and its pressure contours with particle tracks flowing around it?

Many thanks,

  Reply With Quote

Old   February 13, 2003, 14:20
Default Re: Fluent - mulitple displays simultaneously?
Posts: n/a
Here it is

Display -> Scene... Overlays (check)

Hope this will help
  Reply With Quote

Old   February 14, 2003, 10:01
Default Re: Fluent - mulitple displays simultaneously?
Posts: n/a
That's exactly what I wanted - thanks very much

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 26 June 9, 2015 15:38
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 7 May 22, 2014 22:30
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 02:44
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27

All times are GMT -4. The time now is 00:42.