CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

2d domain problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 7, 2003, 10:33
Default 2d domain problem
  #1
Dan Boyle
Guest
 
Posts: n/a
Hi,

I'm a Mech Eng student doing my 3rd year project. I'm trying to model a system which basically consists of a 2d domain with a ducting system in the middle of the domain and other obstacles in the flow.

The problem i'm having is getting the radiator (located inside the duct, spanning entire width) to be included in the mesh. I mesh the faces using tri-paved scheme but gambit misses the edge which is the radiator. I can only get the radiator to be part of a face (and hence mesh) using the virtual face options, but when i try to subtract another obstacle from the domain gambit says that it cannot operate on non-real geometry (i think it has something to with the radiator being modelled as a single edge).

Any help that could be provided would be most appreciated! Please feel free to point out anything you view as obvious, I think i'm probably missing it anyway!

Thanks,

DAN
  Reply With Quote

Old   February 7, 2003, 11:26
Default Re: 2d domain problem
  #2
Erwin
Guest
 
Posts: n/a
You have to include the edge into the face before you start meshing (and prcatice using hexes, tri will give you hard times converging).Check the edge color; is it yellow? Then it is not part of your mesh. It should be blue (and even then it could be unconnected).

One way to solve: create another face from existing edges of the duct and the radiator. Then split the duct with this new face. This should give you two faces:the duct before the radiator and the duct after the radiator. Now both can be meshed.
  Reply With Quote

Old   March 3, 2003, 09:49
Default Re: 2d domain problem
  #3
Dan Boyle
Guest
 
Posts: n/a
Erwin,

Thanks for your help. The information you provided worked! Turns out when I tried something similar before I'd made a mistake with the way I'd one it! Oh well Its working now so thanks again!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 06:57
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
problem in setting the domain to empty Prince OpenFOAM 5 May 6, 2011 14:39
combustion problem mcnair CFX 9 March 22, 2011 15:06
porous domain problem sudhakar CFX 6 November 29, 2006 10:48


All times are GMT -4. The time now is 13:36.