CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Export mesh back to Gambit (https://www.cfd-online.com/Forums/fluent/31137-export-mesh-back-gambit.html)

Paul March 24, 2003 06:13

Export mesh back to Gambit
 
Hello colleagues

Does anybody managed to export mesh back from Fluent to Gambit and save assigned boundaries definitions ?

Thanks for replay

Paul

Pop March 24, 2003 17:13

Re: Export mesh back to Gambit
 
Open Gambit, assign solver (say Fluent 5), then import the mesh.

By doing it in that order you will maintain your BCs

Pop

Paul March 28, 2003 08:04

Re: Export mesh back to Gambit
 
Thanks Pop

I did it in a just same way but all boundaries (INLETS, OUTLETS, PERIODIC, etc) are deleted after export *.case in Gambit. Does any GAmbit defualts influence it ?

Does anybody meets this problem or only I am so lucky ?

Paul

zxaar March 30, 2003 07:47

Re: Export mesh back to Gambit
 
u are not alone, but i haven't tried much on it.. just observed that it does so (i mean what u said).



All times are GMT -4. The time now is 18:59.