 |
 |
 |
|
|
|
[Sponsors] | ||||
June 2, 2003, 15:11
|
Algebraic turb. model
|
#1 |
|
Guest
Posts: n/a
|
Hi, Can anybody tell me how to activate zero eqn turbulence model in Fluent? Regards emre
|
|
|
||
|
June 2, 2003, 20:49
|
Re: Algebraic turb. model
|
#2 |
|
Guest
Posts: n/a
|
i think the RSM contains the zero equ turbulence model.you can see the chapter "10.2.3 Boussinesq Approach vs. Reynolds Stress Transport Models".perhaps it can be helpful.
|
|
|
|
||
|
June 3, 2003, 05:53
|
Re: Algebraic turb. model
|
#3 |
|
Guest
Posts: n/a
|
I was looking for the TUI command to activate it. I found it somewhere at Stanford's ME web site. define/model/viscous/mixing-length y activates the ATM. Regards
|
|
|
|
||
|
June 3, 2003, 06:24
|
Re: Algebraic turb. model
|
#4 |
|
Guest
Posts: n/a
|
i can't find "define/model/viscous/mixing-length"option,where is it?
|
|
|
|
||
|
June 4, 2003, 10:04
|
Re: Algebraic turb. model
|
#5 |
|
Guest
Posts: n/a
|
you just type it one by one. you need to press enter to get command line and also after each command. regards emre
|
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wrong calculation of nut in the kOmegaSST turbulence model | FelixL | OpenFOAM Bugs | 27 | March 27, 2012 09:02 |
| Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |
| CFX's DES turb model hardcoded with kw SST??? | Phil | CFX | 2 | January 7, 2008 20:01 |
| DPM model w/ Wave model - errors in documentation | HS | FLUENT | 0 | April 12, 2006 04:37 |
| Algebraic Dynamic LES Model | noName | FLUENT | 0 | March 24, 2005 17:34 |
Linear Mode
