 |
 |
 |
|
|
|
[Sponsors] | ||||
June 9, 2003, 16:59
|
gambit in fluent
|
#1 |
|
Guest
Posts: n/a
|
i have got a 2D geometry in gambit how i can insided in to the fluent 6 and i take some corollary?
|
|
|
||
|
June 10, 2003, 01:42
|
Re: gambit in fluent
|
#2 |
|
Guest
Posts: n/a
|
Read manual of the fluent ... how to import the msh file to fluent.
or before going to fluent just export the mesh file.. and then in fluent FILE>READ and selet your file (remember the fluent version will be 2D) Alamgir |
|
|
|
||
|
June 20, 2003, 22:42
|
Re: gambit in fluent
|
#3 |
|
Guest
Posts: n/a
|
run fluent with: fluent 2d
read case file---> click on *.msh |
|
|
|
||
|
June 21, 2003, 17:57
|
Re: gambit in fluent
|
#4 |
|
Guest
Posts: n/a
|
thanck you
|
|
|
|
||
|
July 3, 2003, 23:12
|
Re: gambit in fluent
|
#5 |
|
Guest
Posts: n/a
|
after you do your meshing..then go to FILE-EXPORT-MESH.After that you open fluent then FILE-READ-CASE-then find your.msh file...good luck
|
|
|
|
||
|
July 10, 2003, 06:01
|
Re: gambit in fluent
|
#6 |
|
Guest
Posts: n/a
|
Sir:
For my research topic i have created jeometry in the Pro-E and exported the same in GAMBIT. i see help fromsome one to guide me further. amit r patel |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [GAMBIT] BC's value assignment in Gambit Vs. Fluent (solver) | hadikhayyamian | ANSYS Meshing & Geometry | 5 | December 21, 2010 12:28 |
| Global c.sys in GAMBIT or FLUENT | Kasper Skriver | FLUENT | 4 | November 10, 2010 12:49 |
| Gambit Fluent export | John Go | FLUENT | 0 | March 7, 2009 14:48 |
| Fluent case file into Gambit | Eric R. | FLUENT | 7 | July 17, 2002 14:11 |
| Grid for Fluent v.4 using Gambit? | Ray | Main CFD Forum | 3 | October 27, 1999 12:35 |
Linear Mode
