|
[Sponsors] |
July 3, 2003, 14:48 |
Material in Porous media
|
#1 |
Guest
Posts: n/a
|
Hi all
I am new in using Fluent. I just started using Fluent 6.1 to model reacting flow through a porous media. I read the fluent manual but till now I failed to do the following 1. specify the material for porous media 2. Porosity of the porous media 3. type of reaction site available 4. creating udf to define my reaction Please any one have an idea how to handle them. I will be glad if you let me know how I can do all the four task above. Thanks in adavnce |
|
July 4, 2003, 02:40 |
Re: Material in Porous media
|
#2 |
Guest
Posts: n/a
|
dear Rajab,
U can specifly the porous meterial and porosity within the boundary condition panel--> fluid. but i recommend u start from very simply case first, perhap only flow through the pm with any reaction.. |
|
July 4, 2003, 03:00 |
Re: Material in Porous media
|
#3 |
Guest
Posts: n/a
|
hi
Search this foroum for the keywords Porosity and reactive flows. you will get much useful information by |
|
July 4, 2003, 14:42 |
Re: Material in Porous media
|
#4 |
Guest
Posts: n/a
|
Thanks Yee wan and rajiv for the greaat help. But, Still I have one problem specifying species material for surface reactions, I do not know how can I add solid spicies and site species to it. It seems the mixture type of materials does not accept solid type of materials to be added to it..
please help me on it |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 06:21 |
Porous media setup issues in Fluent | Bernard Van | FLUENT | 29 | January 26, 2017 05:09 |
How to model granular flow through porous media | Axius | FLUENT | 2 | August 7, 2014 11:34 |
Two-Phase Buoyant Flow Issue | Miguel Baritto | CFX | 4 | August 31, 2006 13:02 |
porous media: Fluent or Star-CD? | Igor | Main CFD Forum | 0 | December 5, 2002 16:16 |