Search of Fluent User

July 7, 2003, 06:38

Respected sir:

I am in search of some FLUENT User, with whome i can discuss re. the setting problem in FLUENT and GAMBIT, personally. it is fine if some one is residing in the INDIA (prefarably in the WESTERN PART OF INDIA).

see you

thank you

Amit R Patel, Research Scholar

July 7, 2003, 16:39

i can discuss with you but i'm from romania which is far away from india. hope you're not having something against

July 8, 2003, 02:24

Can you suggest me some suitable date and time for the same. initially i want to discuss how to generate mesh. it is regarding my research project on thernal analysis of a fuel fired hot air generator system.

if possible i request you to give me atleast half an hour. to me any of your proposed time is suitable to me. anticipating your positive responce.

amit r. aptel

July 8, 2003, 02:30

We can chat on NET re CFD and mesh generation

amit

July 8, 2003, 08:47

ya,

U can discuss with me. No Problem.

Mahesh

July 9, 2003, 02:53

Sir:

we have generated a jeomatry in PRO/E and imported in the GAMBIT in the form of STEP file format and with all SOLID Option. can you sujjest me how to proceed further. further our jeomatry is very complicated, (number of parts in it). How can i deal with each small individual part.

Can you suggest suitable mode to discuss (address if you are near baroda), time and details of messanger to chat, correspondance address to communicate. Anticipating your positive responce.

i am lecturer at Mechanical Engg. Deptt., Faculty of Technology & Engg., The M. S. University of Baroda, Vadodara

Amit R Patel

July 9, 2003, 10:51

friday 17.00 romanian time

July 9, 2003, 11:01

O. K. Done

amit r patel

July 9, 2003, 11:04

k

cordialement

ciprian mincu

i think that it's easyer to speak directly via mail

mdc@mta.ro

July 9, 2003, 11:09

O. K. Done, Please note that, yahoo messanger is convinient to me, will it be ok. i will inform to you first by sending an E-mail on your 'mdc@mta.ro', or if you are first to login you send me the message about how to contact you and whidh messanger to log in, hope this is fine.

thank you very much, and the courtcy you have shown to me. thankig you once again

amit r patel,

July 10, 2003, 03:14

I Understand that Romania is 3.30 Hrs ahead of India based on this i am planning to sit on net at around 17+3.30 i.e. 20.30 Hrs on Indian Time, is it correct or the other way round.

please note this, for any cange in schedule request you to notify on my this mail.

amit patel

July 7, 2003, 06:38	Search of Fluent User	#1
Patel Amit R. Guest Posts: n/a	Respected sir: I am in search of some FLUENT User, with whome i can discuss re. the setting problem in FLUENT and GAMBIT, personally. it is fine if some one is residing in the INDIA (prefarably in the WESTERN PART OF INDIA). see you thank you Amit R Patel, Research Scholar

July 7, 2003, 16:39	Re: Search of Fluent User	#2
cip Guest Posts: n/a	i can discuss with you but i'm from romania which is far away from india. hope you're not having something against

July 8, 2003, 02:24	Re: Search of Fluent User	#3
Patel Amit R. Guest Posts: n/a	Can you suggest me some suitable date and time for the same. initially i want to discuss how to generate mesh. it is regarding my research project on thernal analysis of a fuel fired hot air generator system. if possible i request you to give me atleast half an hour. to me any of your proposed time is suitable to me. anticipating your positive responce. amit r. aptel

July 8, 2003, 02:30	Re: Search of Fluent User	#4
Patel Amit R. Guest Posts: n/a	We can chat on NET re CFD and mesh generation amit

July 8, 2003, 08:47	Re: Search of Fluent User	#5
mahesh Guest Posts: n/a	ya, U can discuss with me. No Problem. Mahesh

July 9, 2003, 02:53	Re: Search of Fluent User	#6
Patel Amit R. Guest Posts: n/a	Sir: we have generated a jeomatry in PRO/E and imported in the GAMBIT in the form of STEP file format and with all SOLID Option. can you sujjest me how to proceed further. further our jeomatry is very complicated, (number of parts in it). How can i deal with each small individual part. Can you suggest suitable mode to discuss (address if you are near baroda), time and details of messanger to chat, correspondance address to communicate. Anticipating your positive responce. i am lecturer at Mechanical Engg. Deptt., Faculty of Technology & Engg., The M. S. University of Baroda, Vadodara Amit R Patel

July 9, 2003, 10:51	Re: Search of Fluent User	#7
cip Guest Posts: n/a	friday 17.00 romanian time

July 9, 2003, 11:01	Re: Search of Fluent User	#8
Amit R. Patel Guest Posts: n/a	O. K. Done amit r patel

July 9, 2003, 11:04	Re: Search of Fluent User	#9
cip Guest Posts: n/a	k cordialement ciprian mincu i think that it's easyer to speak directly via mail mdc@mta.ro

July 9, 2003, 11:09	Re: Search of Fluent User	#10
Amit R. Patel Guest Posts: n/a	O. K. Done, Please note that, yahoo messanger is convinient to me, will it be ok. i will inform to you first by sending an E-mail on your 'mdc@mta.ro', or if you are first to login you send me the message about how to contact you and whidh messanger to log in, hope this is fine. thank you very much, and the courtcy you have shown to me. thankig you once again amit r patel,

July 10, 2003, 03:14	Re: Search of Fluent User	#11
Patel Amit R. Guest Posts: n/a	I Understand that Romania is 3.30 Hrs ahead of India based on this i am planning to sit on net at around 17+3.30 i.e. 20.30 Hrs on Indian Time, is it correct or the other way round. please note this, for any cange in schedule request you to notify on my this mail. amit patel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
How to get access to Fluent User Services Center?	Steven	FLUENT	3	October 7, 2016 04:31
Question about user defined memories in FLUENT 6.3	lordofnoldor	FLUENT	0	August 18, 2011 10:17
User defined rotational velocity in FLUENT	Abhinav	FLUENT	1	June 10, 2003 08:31
FLUENT user	eisha	FLUENT	1	March 18, 2002 21:57