# Gambit pyramid grid

 Register Blogs Members List Search Today's Posts Mark Forums Read

 July 23, 2003, 12:35 Gambit pyramid grid #1 Frank Guest   Posts: n/a I have a small cuboid in my geometry. It is 3x1x1 mm and I need a grid with pyramids. All Edges are meshed with 1. Only one Edge on the length side is meshed with 2. So normally we can get 4 pyramids easily on paper. But how I can do it in Gambit. There are only hex or tet possible. If I try with tet/hybrid, then it say that it isn't possible. I hope somebody can help me. Tanks Frank

 July 25, 2003, 13:50 Re: Gambit pyramid grid #2 Guess Guest   Posts: n/a do you want all the pyramids in the computational domain or pyramids on the wall surface? If only on the wall create quad mesh on the wall surfaces and use tet/hybrid algorithm for volume mesh generation.

 July 28, 2003, 04:59 Re: Gambit pyramid grid #3 Frank Guest   Posts: n/a Thanks for your information. The cuboid is a part of a very complex geometry, which I cutted to get hexahedral grid with very few pyramids and tetrahedrals. This is not at the wall. And in this cuboid four pyramids must be created, because the faces of this cuboid to the neighbours have defined grid. And this is easily possibly with a pencil and paper, but I only see that gambit only can hexahedral and tetrahedral?

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post caohan FLUENT 3 April 9, 2010 11:30 Armin FLUENT 1 March 10, 2008 16:31 ken FLUENT 4 June 13, 2005 16:03 David FLUENT 4 June 8, 2005 16:20 Ray Main CFD Forum 3 October 27, 1999 12:35

All times are GMT -4. The time now is 21:21.