CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Gambit pyramid grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 23, 2003, 13:35
Default Gambit pyramid grid
  #1
Frank
Guest
 
Posts: n/a
I have a small cuboid in my geometry. It is 3x1x1 mm and I need a grid with pyramids. All Edges are meshed with 1. Only one Edge on the length side is meshed with 2. So normally we can get 4 pyramids easily on paper. But how I can do it in Gambit. There are only hex or tet possible. If I try with tet/hybrid, then it say that it isn't possible. I hope somebody can help me. Tanks Frank
  Reply With Quote

Old   July 25, 2003, 14:50
Default Re: Gambit pyramid grid
  #2
Guess
Guest
 
Posts: n/a
do you want all the pyramids in the computational domain or pyramids on the wall surface? If only on the wall create quad mesh on the wall surfaces and use tet/hybrid algorithm for volume mesh generation.
  Reply With Quote

Old   July 28, 2003, 05:59
Default Re: Gambit pyramid grid
  #3
Frank
Guest
 
Posts: n/a
Thanks for your information. The cuboid is a part of a very complex geometry, which I cutted to get hexahedral grid with very few pyramids and tetrahedrals. This is not at the wall. And in this cuboid four pyramids must be created, because the faces of this cuboid to the neighbours have defined grid. And this is easily possibly with a pencil and paper, but I only see that gambit only can hexahedral and tetrahedral?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
On grid independent solution for pulsatile flow David FLUENT 5 March 25, 2022 04:33
Does anybody know how to build C type grid in Gambit? caohan FLUENT 3 April 9, 2010 12:30
Gambit paves unstructured grid incorrectly Armin FLUENT 1 March 10, 2008 16:31
True Grid vs Gambit ken FLUENT 4 June 13, 2005 17:03
Grid for Fluent v.4 using Gambit? Ray Main CFD Forum 3 October 27, 1999 13:35


All times are GMT -4. The time now is 14:29.