CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Two-Phase flow modelling

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 5, 2003, 06:13
Default Two-Phase flow modelling
Mamdud Hossain
Posts: n/a
Hello there:

I am doing a two-phase Eulerian flow modelling of air and fibre. Basically the flow is going over a drum. The air will escape through the drum, while the fibre will lay over the drum. Ideally the drum should a permeable wall for air, but not for the fibre. Any idea about how to setup the boundary condition on the drum will be very much appreciated.

Thanks in advance.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
two phase flow + ice phase and breaking soeren87 OpenFOAM Running, Solving & CFD 0 September 19, 2010 10:20
how 2 freeze 1 phase flow field & start lagrangian KK CFX 5 February 14, 2008 17:48
modelling slug flow with pressure inlet Azman FLUENT 0 May 29, 2006 06:45
Two phase Flow instability shaoping Main CFD Forum 1 September 8, 2003 13:25
Single Phase Swirling Flow Modelling with Structured and Unstructured Fluent Daniel J. Suasnabar FLUENT 2 January 18, 2000 03:53

All times are GMT -4. The time now is 05:55.