Large Area Curved Diffuser

August 11, 2003, 11:14

I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations

Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.

August 12, 2003, 23:51

I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations

Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.

August 13, 2003, 03:38

hi SKM,too many questions here.have you start drawing this diffuser?and if you have draw this, what is your problem you facing?it seems that you know nothing .

August 13, 2003, 06:37

truly , I am blur and have met dead ends on this. PLEASE HELP!!!!!!!!!

August 11, 2003, 11:14	Large Area Curved Diffuser	#1
Sharman Kristy Michael Guest Posts: n/a	I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.

August 12, 2003, 23:51	Re: Large Area Curved Diffuser	#2
Sharman Kristy Michael Guest Posts: n/a	I am a beginner user in CFD. My problem is Analysis of Large Area Curved Diffuser using CFD Ver. 6. Please help me in the following areas; 1) how to model a Large Area Curved Diffuser ( such as air ventilation duct) 2) how to design and simulate it 3) how to set up the whole experiment 4) how to set the boundry conditions,parameters, materials 5) all the relevant calculations Its a 3D modelling. Please help me. I am desperate here. If you have a better idea on this design of experiment (DOE), you are most welcome to guide and advice me on it. Thank u in advance.

August 13, 2003, 03:38	Re: Large Area Curved Diffuser	#3
jinggo Guest Posts: n/a	hi SKM,too many questions here.have you start drawing this diffuser?and if you have draw this, what is your problem you facing?it seems that you know nothing .

August 13, 2003, 06:37	Re: Large Area Curved Diffuser	#4
Sharman Kristy Michael Guest Posts: n/a	truly , I am blur and have met dead ends on this. PLEASE HELP!!!!!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with reference area	alfaben	STAR-CCM+	3	April 21, 2020 09:46
Non overlap area fractions	saisanthoshm88	CFX	11	September 17, 2015 18:42
Water subcooled boiling	Attesz	CFX	7	January 5, 2013 03:32
CFX Solver Memory Error	mike	CFX	1	March 19, 2008 07:22
Designing curved diffuser using gambit	Sharman Kristy Michael	FLUENT	0	August 29, 2003 03:54