Mixing Plane -- CFD Online Discussion Forums

August 8, 2003, 22:36	Mixing Plane	#1
Lee Guest Posts: n/a	I am using Mixing Plane model. It diverges on first iteration. I already lowered under-relaxation to 0.01. I suspect that divergence may be caused by misalignment of mixing plane. Mixing plane was aligned neither axial direction or radial direction but with angle. I used axial direction for mixing plane. Who knows if this can cause divergence? Or what can cause divergence? Thanks~!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mixing plane model: too much backflow and does not converge	sbhi	FLUENT	1	December 4, 2014 00:31
Problem with Mixing plane	Mitpostdoc	FLUENT	0	July 26, 2011 14:31
Meshing a Mixing Plane in ICEM	Will Anderson	ANSYS Meshing & Geometry	2	November 9, 2010 09:16
Meshing a Mixing Plane using ICEM	Will Anderson	FLUENT	0	November 6, 2010 17:08
Mixing plane geometry definition	Hbet	FLUENT	0	January 18, 2002 07:16

All times are GMT -4. The time now is 09:42.