|
[Sponsors] |
August 18, 2003, 07:33 |
ERROR?
|
#1 |
Guest
Posts: n/a
|
Welcome to Fluent 6.0.12
Copyright 2001 Fluent Inc. All Rights Reserved Loading "c:\fluent.inc\fluent6.0\lib\fl_s112.dmp" Done. Could not check out fluent: Invalid returned data from license server Feature: fluent Hostname: Che_nt License path: c:\fluent.inc\license\license.dat; FLEXlm error: -12,122 For further information, refer to the FLEXlm End User Manual, available at "www.globetrotter.com". Hit return to exit. |
|
August 18, 2003, 11:13 |
Re: ERROR?
|
#2 |
Guest
Posts: n/a
|
Your license file (license.dat) has some problem, and the license server doesn't allow FLUENT to start.
|
|
August 18, 2003, 12:13 |
Re: ERROR?
|
#3 |
Guest
Posts: n/a
|
the same (license.dat) is working fine with other PCs.
|
|
August 18, 2003, 13:01 |
Re: ERROR?
|
#4 |
Guest
Posts: n/a
|
You may have exceeded your max number of open Fluent processes.
Ask someone to shut down one of their sessions and try starting up Fluent again. |
|
August 19, 2003, 03:10 |
Re: ERROR?
|
#5 |
Guest
Posts: n/a
|
When all are in use then this happens. =======================================
Welcome to Fluent 6.0.12 Copyright 2001 Fluent Inc. All Rights Reserved Loading "c:\fluent.inc\fluent6.0\lib\fl_s112.dmp" Done. Current fluent usage: 1. Guest@che-ws-04 Mon Aug 18 19:09 che-ws-04 2. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 3. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 4. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 5. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 6. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 7. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 8. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 9. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 10. Guest@che-ws-04 Tue Aug 19 10:13 che-ws-04 11. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 12. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 13. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 14. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 15. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 16. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 17. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 18. Guest@che-ws-04 Tue Aug 19 10:14 che-ws-04 19. Guest@che-ws-04 Tue Aug 19 10:15 che-ws-04 20. Guest@che-ws-04 Tue Aug 19 10:15 che-ws-04 License for fluent expires 27-oct-2003. All licenses for fluent are currently in use. Hit return to exit. ====================================== That PC is still, all the time, giving the above mentioned (AT THE START)message. |
|
August 19, 2003, 08:38 |
Re: ERROR?
|
#6 |
Guest
Posts: n/a
|
It says right at the end that all of the Fluent licenses are in use. You only get a certain number of licenses per your purchase agreement. If all of the available licenses are being used, then you cannot open a new session. You need to ask some of the other users to shut down their active sessions, so you can open one.
Do all of those sessions belong to you? Are you the only user? Do you have any other sessions open? If your answers are yes, yes, no. Then you may have some orphan processes running which are gobbling up your available licenses and you will need to terminate them. |
|
August 19, 2003, 11:37 |
Re: ERROR?
|
#7 |
Guest
Posts: n/a
|
Thanks. i have shown that when all licenses are in use then the message will be like that. "all ... are in use" so ur answer on Mon 18 Aug 2003, 11:01 a.m was denyed by that ==================================== i have still the ERROR on the PC which i have mentioned on Mon, 18 Aug 2003, 5:33 a.m ============ thanks again
|
|
August 19, 2003, 12:27 |
Re: ERROR?
|
#8 |
Guest
Posts: n/a
|
Hi Zahid,
I had exactly the same problem. It turned out there was a spyware program blocking my port. This stopped my work for weeks because fluent couldn't figure this out!! you must get your hands on an ad removal package like ad-watch from lavasoft. Try download.com, I'm sure you can get a spy removal program from there. Hope this helps , Mark. |
|
August 20, 2003, 04:57 |
Re: ERROR?
|
#9 |
Guest
Posts: n/a
|
U must start your FLEXM server. IF you do not define the FLEXM server to be started automaticly when the system is started,you must start the FLEXM server manually.
|
|
August 20, 2003, 11:08 |
Re: ERROR?
|
#10 |
Guest
Posts: n/a
|
it is started
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh | gschaider | OpenFOAM Community Contributions | 300 | October 29, 2014 18:00 |
c++ libraries and solver compiling | vaina74 | OpenFOAM Installation | 13 | February 3, 2012 17:43 |
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug | unoder | OpenFOAM Installation | 11 | January 30, 2008 20:30 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 17:51 |
user defined function | cfduser | CFX | 0 | April 29, 2006 10:58 |