CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Porous Media

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 5, 2003, 15:48
Default Porous Media
Posts: n/a
Hi, I am a beginner in porous media.

I wanted to know: - What type of boundary I should use for the interface of a porous zone and major fluid zone? -Is it necessary to use "Porous Jump" ? or just activating the porous option in the "Fluid Zone" will suffice?

Thank you. Mazyar
  Reply With Quote

Old   September 7, 2003, 20:08
Default Re: Porous Media
Jin-Wook LEE
Posts: n/a
You do not need any boundary condition between 'fluid zone' and 'porous zone'.

Sincerely, Jinwook
  Reply With Quote

Old   September 8, 2003, 04:39
Default Re: Porous Media
Posts: n/a
ya, not need any special boundary condition for the interface.

The porous jump mainly act as the performable plate.

anyway, the interface between the porous media and any pure fluid adjact to it may define as interior or internal. Thus can be found in Gambit.

have fun.


  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Porous media setup issues in Fluent Bernard Van FLUENT 29 January 26, 2017 05:09
How to model granular flow through porous media Axius FLUENT 2 August 7, 2014 10:34
Multiphase Porous Media Flow - Convergence Issues VT_Bromley FLUENT 5 March 23, 2011 11:38
species mass source in porous media ? PK FLUENT 0 February 16, 2007 12:12
porous media: Fluent or Star-CD? Igor Main CFD Forum 0 December 5, 2002 16:16

All times are GMT -4. The time now is 03:26.