CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Boundary Layer?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 17, 2003, 12:27
Default Boundary Layer?
  #1
P.I
Guest
 
Posts: n/a
Hi,

I want to model a cyclone seperating devise but I am having a few concerns about the grid that I have generated. (Gambit v.2.1.6). My real concern is to do with the boundary layer on the walls. I understand that by using normal wall functions, the Y+ value should be between 30 and 60, however, how do I go about generating a good initial approximation on how fine the grid at the wall should be?

Thanks

P.I

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Default Faces on Boundary Layer axel OpenFOAM Meshing & Mesh Conversion 8 February 17, 2011 08:47
Boundary Layer Question scottneh STAR-CCM+ 3 September 30, 2010 15:21
Adapt mesh without modifying boundary layer cells? Freeman FLUENT 0 February 22, 2009 15:11
3D Boundary Layer Mario FLUENT 0 February 17, 2009 04:40
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 17:43.