|
[Sponsors] |
January 14, 2020, 23:03 |
Internal heat generation
|
#1 |
New Member
Jakub
Join Date: May 2018
Posts: 6
Rep Power: 7 |
Hi,
Is there a way to apply power to the body something like internal heat generation in steady-thermal instead of adding heat flux to the wall? Could you please tell me how to do it in Fluent (and in CFX as well). Thanks. |
|
January 14, 2020, 23:20 |
|
#2 |
Senior Member
Svetlana Tkachenko
Join Date: Oct 2013
Location: Australia, Sydney
Posts: 407
Rep Power: 14 |
In CFX-Pre, if you add a subdomain, you can set its "sources" such as a volumetric energy source. In ANSYS Fluent under "Cell Zone conditions" you can tick "Source Terms" and set the value for energy. Is this what you are after?
|
|
January 14, 2020, 23:54 |
|
#3 |
New Member
Jakub
Join Date: May 2018
Posts: 6
Rep Power: 7 |
Thanks a lot for a quick reply. I think this is exactly what I needed. Could you please take a look if it should it be done like this if I want to apply it to the copper body? (with CFX it's my first time so I am clueless).
|
|
January 15, 2020, 00:05 |
|
#4 |
New Member
Jakub
Join Date: May 2018
Posts: 6
Rep Power: 7 |
Why do I getting a thousand of errors trying to edit / post something here? |
|
January 15, 2020, 00:30 |
|
#5 |
Senior Member
Svetlana Tkachenko
Join Date: Oct 2013
Location: Australia, Sydney
Posts: 407
Rep Power: 14 |
Could you please describe your problem in more detail? Describe the geometry and boundary conditions. Then it will be easier to tell where to add the heat source.
(Sorry about the website problems - what error messages do you get?) |
|
January 15, 2020, 00:35 |
|
#6 |
Senior Member
Svetlana Tkachenko
Join Date: Oct 2013
Location: Australia, Sydney
Posts: 407
Rep Power: 14 |
I received your image link. What I saw:
- A pipe - Ambient domain surrounding the pipe is meshed - Inside of the pipe is not meshed - A half of the surrounding fluid domain is marked as 'subdomain 1' in 'copper'. The screenshot is showing application of volumetric heat source in this half. The question is, what is the real problem at hand? Does the fluid flow inside of the pipe interest you? Where is the heat coming from? Many thanks. |
|
January 15, 2020, 00:49 |
|
#7 |
New Member
Jakub
Join Date: May 2018
Posts: 6
Rep Power: 7 |
Actually it is just an idea in my head. I need to do few cases for my masters thesis which is about CFD software benchmark. I use ANSYS and Autodesk CFD.
In this particular case I thought of a pipe inside a 2-material solid of which part is made of copper and aluminium. The inside of the pipe is meshed too which may not be really visible in this case. In this case I want to do a heat transfer comparison using different software, turbulence models and solvers. So this ambient is really a solid. I was also thinking of doing some kind of external volume but haven't decided yet. That subdomain 1 is the thing I created based on your advice in the copper solid part which i decided will be generating heat itself. So I'm basically interested in everything - the temperature, pressures, velocities etc. |
|
January 15, 2020, 01:08 |
|
#8 |
Senior Member
Svetlana Tkachenko
Join Date: Oct 2013
Location: Australia, Sydney
Posts: 407
Rep Power: 14 |
I see. I guess if the surrounding solid generates heat uniformly throughout the entire volume, then this setup is correct. This is in contrast to a case where heat is applied only on one side of the volume, which from your description does not appear to be the case.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
heat generation problem | montazar | FLUENT | 0 | March 11, 2016 13:28 |
heat generation rate in the wall boundary conditions, what this? | serguei | Fluent Multiphase | 3 | September 10, 2015 16:24 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
temperature dependent internal heat generation | dbrodrigues | ANSYS | 0 | March 31, 2012 01:16 |
internal heat source | sofie1 | FLUENT | 0 | March 12, 2011 14:09 |