CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

CAVITATION (convergence criteria & discretization)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 4, 2003, 10:21
Default CAVITATION (convergence criteria & discretization)
  #1
ROOZBEH
Guest
 
Posts: n/a
Hi all; I want to model the cloud cavitation.The xcact local value of pressure in the flow field is very important for me. However solution convergence correctly is important.By the scaled residue less than .001 criteria, I get bad results. I decide to work with unscaled residue criteria. In this criteria I choose the order of residue of each quantity, .01 less than the average value of that quantity. Any suggestion?! What schem is better for discretization? Pressure: PRESTO! momentum,turbulance,volum fraction,... : (second order upwind) Thanks!
  Reply With Quote

Old   October 6, 2003, 10:32
Default Re: CAVITATION (convergence criteria & discretizat
  #2
mateus
Guest
 
Posts: n/a
Hi ROOZBEH!

Sorry for not answering your email from last month - I was not at institute... Maybe you should look at:

http://iridium.me.es.osaka-u.ac.jp/cav2003/index1.html

you can find a lot of papers on simulating cavitation...

Hope it helps

Regards

MATEUS
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Convergence Centurion2011 FLUENT 48 June 15, 2022 00:29
Force can not converge colopolo CFX 13 October 4, 2011 23:03
Convergence and discretization karananand FLUENT 3 August 29, 2010 07:07
Discretization and convergence karananand Main CFD Forum 0 August 4, 2010 17:19
What value shall I set for the Convergence criteria? steventay CFX 7 May 14, 2010 13:44


All times are GMT -4. The time now is 21:29.