|
[Sponsors] |
October 1, 2003, 00:01 |
Question for Induction heat
|
#1 |
Guest
Posts: n/a
|
Hello all,
I am considering heat and flow simulation including induction heat mechanism, such as Iron melting with high/low frequency induction heating. Does anybody have experience similar model to this? If yes, could you let me have your idea or method? Thanks and regards, J.W.Ryu |
|
October 17, 2003, 12:27 |
Re: Question for Induction heat
|
#2 |
Guest
Posts: n/a
|
hi,
i suggest you go to the following adress: http://www.cranfield.ac.uk/cww/ccc/d...tg/node278.htm this tutorial might help in your case i hope this helps dr |
|
October 20, 2003, 08:08 |
Re: Question for Induction heat
|
#3 |
Guest
Posts: n/a
|
Dear Mr/Ms. Rochaya,
Thanks for your suggestion. But, I can not access adress that you suggested. Could you let me have correct adress? Thanks and regards, J.W.Ryu |
|
October 20, 2003, 10:07 |
Re: Question for Induction heat
|
#4 |
Guest
Posts: n/a
|
hi,
you can find te same tutorial on this adress: http://p2chpd-cluster.univ-lyon1.fr/...tg/node278.htm I hope this helps dr |
|
October 23, 2003, 08:22 |
Re: Question for Induction heat
|
#5 |
Guest
Posts: n/a
|
Thanks for your advice. I have read this tutorial, and have tutorial book. What I want to know was the method to simjulate heat transfer from induction heat source. Probably my provious post made you confusion. I am sorry.
J.W.Ryu |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Question concerning the heat capacity Cp | tangd | OpenFOAM Running, Solving & CFD | 1 | July 10, 2006 03:25 |
Simple 2d Heat transfer question | Richard | FLUENT | 2 | January 18, 2006 22:49 |
VISCOUS heat dissipation | Joseph | CFX | 0 | October 1, 2004 08:52 |
Heat flux question? | Mark | Main CFD Forum | 0 | February 13, 2004 09:03 |