CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Heat Flux from warm water ...

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 5, 2003, 21:48
Default Heat Flux from warm water ...
Posts: n/a
Dear users ... Model : pipe 18/16 mm. Inside is runing warm water with 90 degrees of Celsius.On the pipe is metal sheet with 0,2 mm thicnkess. I would like to simulate charakteristic of temperature to distance from surface pipe-metal sheet. Problem : I don't know, what kind of boundary conditions are metal sheet, pipe. I solved this was : (2D) Pipe is "wall" with heat flux about 70 W/m2, 340 K, thickness 1 mm, material (Cu) with constant thermal conductivity. Metal sheet is "solid" with initialize temperature about 395 K. After starting iterate, iterating finished in 5. steps like convegency solution. Then Fluent tell me any error in file, which is compile in C (I mean C++) Please, advise me with this problem Thank you!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sign of Heat Flux at wall Kyung FLUENT 2 February 26, 2016 17:25
heat flux distribution gtheo CFX 2 April 27, 2011 03:36
CFX - wall heat flux divarano CFX 2 December 4, 2006 17:14
monitoring dynamic heat flux through a surface abdnakhi FLUENT 0 August 15, 2005 09:57
Wall heat flux cujo CFX 3 November 6, 2002 04:43

All times are GMT -4. The time now is 17:35.