|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
hi i have aerosol simulation with fluent. that aerosol flow in cyclone. I model it with discrete phase.In my model, i include energy radiation(P1) equation The gas(air) has temperature 823 K and particle is 323 K. Gas has mass = 43 kg/s and prticle is 35 kg/s. Particle(inert particle) has density 2800 kg/m3, Cp=1200 kj/kgK and emisivitas particle is 0.9. The wall of cyclone is adiabatik. When the simulation is finish and i check gas temperature. but gas temperature is still 823K.
Please if anyone know about that, tell me what i must do. thank you |
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
hi,
did you activate the energy equation? cheers David |
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Make sure you check the 'Interaction with continuous phase' box in the Discrete Phase menu.
|
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
Hi David yes, i had activated the energy equation but the end of simulation gas temperature still like that. i am very confuse. thank for your suggest
|
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
Hi Erwin Yes. i had include interaction partilce with continous phase. The option which i activated were particle radiation ineraction and coupled heat mass solution. thanks for your response.
|
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
Hi Erwin Yes. i had include interaction partilce with continous phase. The option which i activated were particle radiation ineraction and coupled heat mass solution.But the gas out temperature is still like gas tenperature inlet. thanks for your response.
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 06:21 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
Problems involved heat transfer inside a particle and its thermal degradation | zhangr | STAR-CCM+ | 2 | August 25, 2011 07:59 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 09:56 |
Two-Phase Buoyant Flow Issue | Miguel Baritto | CFX | 4 | August 31, 2006 13:02 |