HDPE properties for Polyflow

January 21, 2004, 04:34

I am looking for the HDPE properties required to do a simulation in Polyflow.

Regards Alwyn

January 26, 2004, 05:06

You can find some *.mat file to be read in into POLYDATA in the installation directory:

Fluent.Inc\polyflow3.10.0\Material_Data

Best

Thierry

January 26, 2004, 05:10

Thank You Thierry

natuan74 · February 12, 2010, 00:04

Hi Experts on Polyflow!

I am a newer in using polyflow. I am now using the polyflow 3.10 to simulate a impinging jet of non-newtonian fluid with Power law model. I can show visualization of norm-velocity, pressure, viscosity, shear rate, in fieldview, but I can not show the value pointing color pieces as a side-note. I can not also show graphs which present relationship between viscosity and shear rate,...
How wil I do to show them? I very appreciated when receiving the advices from polyflow experts.
Thank you so much.

TUAN

ashksingh · April 25, 2018, 22:41

Hi Natuan74,

I am trying to measure the swell of the HDPE extrudate through a die using PTT model and temperature dependent viscosity as well. Could you tell how you visualize the viscosity in the field view? I can only get the shear rate, pressure, velocity.

Thanks in advance.

January 21, 2004, 04:34	HDPE properties for Polyflow	#1
Alwyn Bester Guest Posts: n/a	I am looking for the HDPE properties required to do a simulation in Polyflow. Regards Alwyn

January 26, 2004, 05:06	Re: HDPE properties for Polyflow	#2
Thierry Guest Posts: n/a	You can find some *.mat file to be read in into POLYDATA in the installation directory: Fluent.Inc\polyflow3.10.0\Material_Data Best Thierry

January 26, 2004, 05:10	Re: HDPE properties for Polyflow	#3
Alwyn Guest Posts: n/a	Thank You Thierry

February 12, 2010, 00:04	Polyflow helps/urgently!!	#4
natuan74 New Member Nguyen Anh Tuan Join Date: Jan 2010 Posts: 3 Rep Power: 16	Hi Experts on Polyflow! I am a newer in using polyflow. I am now using the polyflow 3.10 to simulate a impinging jet of non-newtonian fluid with Power law model. I can show visualization of norm-velocity, pressure, viscosity, shear rate, in fieldview, but I can not show the value pointing color pieces as a side-note. I can not also show graphs which present relationship between viscosity and shear rate,... How wil I do to show them? I very appreciated when receiving the advices from polyflow experts. Thank you so much. TUAN

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
Chemical properties that are used in Fluent	kimej	FLUENT	4	August 19, 2011 11:29
Constant velocity of the material	Sas	CFX	15	July 13, 2010 08:56
Properties of air versus temperature AND pressure	Vincent	Main CFD Forum	5	July 28, 2008 06:28
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02

April 25, 2018, 22:41		#5
ashksingh New Member Ashish Kumar Singh Join Date: Apr 2018 Posts: 2 Rep Power: 0	Hi Natuan74, I am trying to measure the swell of the HDPE extrudate through a die using PTT model and temperature dependent viscosity as well. Could you tell how you visualize the viscosity in the field view? I can only get the shear rate, pressure, velocity. Thanks in advance.