CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

press value at press outlet BC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 29, 2004, 12:44
Default press value at press outlet BC
  #1
ace
Guest
 
Posts: n/a
hi can anyone tell, what pressure value to give on Press outlet once the body is attached to the press outlet from the rear and infront press inlet is given as BC and 101325 pascals is given. The case is subsonic compressible.
  Reply With Quote

Old   January 30, 2004, 05:44
Default Re: press value at press outlet BC
  #2
mateus
Guest
 
Posts: n/a
Hi!

The pressure difference between pressure inlet and pressure outlet will give you the desired flow velocity. One more thing. Your body should not be attached to the outlet bc. You will get big problems with reversed flow in this case. You shuld put the outlet bc far away from your body to avoid this.

Regards

MATEUS
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure Outlet Guage pressure Mohsin FLUENT 36 April 29, 2016 18:16
Compressible flow, no data at the outlet mireis FLUENT 6 September 3, 2015 03:10
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 16:45
VOF Outlet boundary condition in cfd - ace JM Main CFD Forum 0 December 15, 2006 09:07
Impinging Jet. Outlet Boundary Condition Vincent Main CFD Forum 0 December 16, 2003 11:49


All times are GMT -4. The time now is 12:27.