|
[Sponsors] |
February 2, 2004, 06:34 |
Working with sails
|
#1 |
Guest
Posts: n/a
|
Hello, i have a problem meshing my sails in gambit, iīm studing it lilke a infinite thin layer, like a membrane. The problem is how can i mesh my sails without making with it a volume, i explain it better. My control volume can`t contain a 2d form becouse i cant substrate a 2d from a 3d form, thatīs why i have to do volume whit my sails. Iīm asking for other way to do it beacouse doin a volume can be dificult with some sailīs forms.
Thanks |
|
February 2, 2004, 07:01 |
Re: Working with sails
|
#2 |
Guest
Posts: n/a
|
Hi!
Why don't you construct your domain from more then one volume. For example. Volume in frot of the sail, volume behind the sail (these two shere 1 face - your sail geometry defined ac wall bc) and four more volumes on each side of the sail. This should work for you. Regards MATEUS |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DPM parallel is not working but serial is working | johnwinter | FLUENT | 1 | March 27, 2012 02:01 |
Modelling 2d sails with masts in Fluent | panosna | FLUENT | 0 | February 28, 2010 12:52 |
Working Principle of Micro-Oven | aero | Siemens | 2 | January 31, 2007 05:00 |
Help required on working of Micro-oven | aero | CFX | 4 | January 19, 2007 08:21 |
Help required on working of Woven | aero | FLUENT | 0 | January 16, 2007 06:25 |