CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

[Q]flux matching technique using UDFs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 26, 2004, 21:28
Default [Q]flux matching technique using UDFs
  #1
Ryan, Lee
Guest
 
Posts: n/a
Solver automatically divides wall into wall & wall_shadow when wall boundary condition is given bwteew two fluid region.(of course, in the case of interface between solid region and fluid region)

I've encountered little bit complicated problem. The problem is I have to manually match flux value between wall and wall_shadow boundary using UDFs since I'm using user-defined scalar transport equations.

Is there anybody who had experienced this situation? Any comment is appreciated.

  Reply With Quote

Old   February 26, 2004, 21:48
Default Re: [Q]flux matching technique using UDFs
  #2
David harvey
Guest
 
Posts: n/a
I am looking at this same issue with the intent to couple the electronic potentials in a gas diffusion layer and in its conducting plate. There is a UDF code posted on Fluent's website that deals with coupling two Scalar Transport equations across a wall boundary and its shadow wall. This code might be of some help.

Regards,

DH
  Reply With Quote

Old   February 26, 2004, 23:32
Default Re: [Q]flux matching technique using UDFs
  #3
Ryan, Lee
Guest
 
Posts: n/a
Thank you. Harvey.

Anyway, I guess you're currently interested in Fuel Cell Modeling. I'm also interested in PEMFC modeling and focusing on coupling flux value between catalyst layer and membrane layer.

Do you solve water transport equation as a two phase system? or just solve water vapor phase?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Interepreted Vs. Compiled UDFs Antonis Fluent UDF and Scheme Programming 10 March 22, 2018 12:15
[snappyHexMesh] jagged, ragged edges... ziemowitzima OpenFOAM Meshing & Mesh Conversion 138 July 24, 2012 00:41
problem using property udfs in parallel mode EllenW FLUENT 0 June 23, 2009 18:18
Unsteady and Flux UDFs for UDSs tom FLUENT 0 February 13, 2009 11:27
Experimental Repository for UDFs, Journal Files and Scheme Scripts Jonas Larsson FLUENT 0 March 5, 2000 16:36


All times are GMT -4. The time now is 04:06.