CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Mixture model in FLUENT 6.0

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 24, 2004, 04:39
Default Mixture model in FLUENT 6.0
  #1
Siva
Guest
 
Posts: n/a
Hi friends

I am using the multiphase mixture model for studying air and fuel flow in a carburetor.The air enters the venturi and fuel enters in a separate passage through jet.The fuel enters into the venturi and then mixes with the air.Only a portion of the fuel should get vapourised.A mixture of air,fuel,fuel vapour should travel after the venturi.

But the problem i am facing is that fuel gets completely vapourised and mixes with the air and after the venturi only air is flowing.Do any of you can help me?

Thanks in advance Sivakumar
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixture model for cavitation mech5190 FLUENT 12 December 7, 2016 04:24
Mixture model validation cases Antoine Main CFD Forum 1 January 24, 2011 02:02
VOF Model or Mixture Model mems21 FLUENT 2 March 9, 2010 11:37
How to include lift forces/wall lubrication forces in the MIXTURE multiphase model? hohomm FLUENT 0 December 17, 2009 06:45
multi fluid mixture model issue rystokes CFX 3 August 9, 2009 20:13


All times are GMT -4. The time now is 15:03.