CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Cell Temperature using udf

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 15, 2004, 05:18
Default Cell Temperature using udf
  #1
Karthick
Guest
 
Posts: n/a
I need to take the temperature of each cell from my model using udf. But C_T(c,t) is not working well in case of Multiphase Eulerian model. In case of Eulerian model, how I can get the cell temperature.

Regards Karthick
  Reply With Quote

Old   April 15, 2004, 06:56
Default Re: Cell Temperature using udf
  #2
thomas
Guest
 
Posts: n/a
I do comfirm you that C_T works perfectly with eulerian model. Check if you are using the right threads, or if you have simply activate the energy equation ! Thomas
  Reply With Quote

Old   April 19, 2004, 07:29
Default Re: Cell Temperature using udf
  #3
Mahesh
Guest
 
Posts: n/a
Yes, I have also used and checked with Eulerian Model. It works fine. Use proper thread to access it. U have to get the pointer to reqd. phase and use the macro.

Mahesh
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fixed Temperature Cell in Solution ozzythewise OpenFOAM Pre-Processing 22 February 24, 2012 06:56
interchanging face information with cell information/ radiation flux UDF ximik FLUENT 1 May 4, 2011 17:34
how to write a 3D linear temperature of UDF venus FLUENT 1 October 28, 2008 03:46
udf for varying inlet temperature aravind FLUENT 0 October 27, 2008 11:08
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 12:47.