CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

3D model with gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 16, 2004, 08:41
Default 3D model with gambit
  #1
yann
Guest
 
Posts: n/a
hi

i am trying to learn fluent and gambit. i am trying to study a flow over a cube. i have already modelised and studied the case with a cube with sharp edges and i would like to see the difference compared to a cube with round edges. i have created a cube with round edges, then a rectangle that i extended in volume. then i substract the two volume. my problem is in meshing. i don't know how to mesh the volume.

if someone could help me, that would be great

thanks
  Reply With Quote

Old   April 16, 2004, 11:59
Default Re: 3D model with gambit
  #2
soody
Guest
 
Posts: n/a
hi,

I couldn't undrestand the shape that you have created, but you can easily select all volumes and create mesh,no matter what is your volume. If you have basic problem in meshing let me know.

good luck ,Soody.
  Reply With Quote

Old   April 18, 2004, 05:53
Default Re: 3D model with gambit
  #3
leung
Guest
 
Posts: n/a
Just use simply volume mesh command, as there is only 1 volume is formed after substract the two volume if u want to have basic idea in meshing, just strat with volume mesh without doing edge and face mesh
  Reply With Quote

Old   April 18, 2004, 15:44
Default Re: 3D model with gambit
  #4
co2
Guest
 
Posts: n/a
read the following gambit tutorial

MODELING A COMBUSTION CHAMBER (3-D)

at

http://www.fluentusers.com/gambit2/d...guide/tg04.htm

you will need username and pwd for access.

see how they create mesh in figure 4-3

that will solve your problem !

  Reply With Quote

Old   April 26, 2004, 22:07
Default Re: 3D model with gambit
  #5
Mohammed Shamol
Guest
 
Posts: n/a
Go and start to do cooper meshing. It is good for volume mesh. u need to select a face as a source .

It works........I believe
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3d pemfc model - fluent module & gambit - error meisam FLUENT 10 February 14, 2018 17:47
How to import 2D wireframe model to GAMBIT vrd FLUENT 0 June 12, 2011 13:47
How to convert model from Gambit to Star CD ? Jimmy Siemens 4 September 16, 2008 11:07
DPM model w/ Wave model - errors in documentation HS FLUENT 0 April 12, 2006 05:37
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27


All times are GMT -4. The time now is 19:37.