CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

need suggestion for simulation !!!!!!! URGENT!!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 11, 2004, 12:24
Default need suggestion for simulation !!!!!!! URGENT!!!!
Arthur Gamara
Posts: n/a
i have already made simulation for flow around bullet. i made 3 conditions: 1. just before bullet pass end of barrel (bullet-end of barrel-environment) 2. half body in barrel, another out of barrel 3. just bullet completely out from barrel

make asumption there is no distance between bullet, barrel and envy. i added pressure behind the bullet because the effect of blast, am i right??? also i didn't set the bullet to rotate, coz the rotation of the bullet is caused by it's geometry and movement,and it starts rotate after few moment it's leave the barrel outlet.

for meshing, there is no problem, but in fluent i'm very confused to make define this simulation. what's the best condition to make this simulation valid???

Can anyone help me??? Thanks very much for your suggestions ..!!!
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
suggestion for thermophysicalproperties for high temperature buoyant flow braennstroem OpenFOAM Running, Solving & CFD 0 March 21, 2011 15:06
Urgent - Polyflow - particle tracking visualization -Urgent shafaatht ANSYS 0 October 13, 2010 04:56
Urgent, Urgent, a UDF problem, PLEASE HELP!!! Max FLUENT 1 September 24, 2010 20:30
Urgent...urgent...plss!!! astronome FLUENT 0 October 16, 2009 07:17
tmerge urgent urgent jessica FLUENT 4 July 15, 2006 13:37

All times are GMT -4. The time now is 15:56.