CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Deformable can filled with high pressure gas

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 19, 2004, 01:03
Default Deformable can filled with high pressure gas
Posts: n/a
We are going to model a a deformable alumium can filled with high-pressure gas. Steady state. Can fluent deal with this case? or maybe we need to try some FEM software like Abacus?
  Reply With Quote

Old   May 20, 2004, 04:01
Default Re: Deformable can filled with high pressure gas
Posts: n/a
Fluent at the moment doesn't include the capability to do FSI (Fluid-Structure Interaction) analysis. But for your case I doubt that this is what you need. You'll have only a constant pressure in your can, perhaps decreasing slightly with the deformations. Anyway, any structural analysis tool should offer the capability to simulate pressure vessels.

Good luck

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
High pressure in rhopSonicFoam results in negative pressure shangzung OpenFOAM 0 November 5, 2009 04:24
how to simulate exhaust of high pressure tank song CFX 3 January 11, 2009 17:54
Using ideal gas law to simulate pressure decline Björn Mattsson FLUENT 5 September 5, 2005 04:03
Total pressure in real gas (compressible flow) Bart Prast Main CFD Forum 3 November 14, 2000 11:44
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00

All times are GMT -4. The time now is 06:28.