CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

tightness of door

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 2, 2004, 14:22
Default tightness of door
  #1
sam
Guest
 
Posts: n/a
hello fluent users , my problem is that i want to simulate the water tightness of door e.g if i flow the water from one side and strikes it on the door and if i can simulate that thing that is there any leakage of water through the water tight seal.if it is possible then tell me how i can model the flow domain and what are the boundary conditions for this particular problem. Thanks in advance
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Door Swing rw511 FLUENT 4 March 22, 2021 10:46
Door opening and closing Rana FLUENT 5 May 3, 2010 09:09
What BC should I set for door? CFX5.7User CFX 4 February 24, 2005 15:12
Boundary conditions in CFX-Pre Saikat CFX 2 February 10, 2005 08:22
Need your help! How can I get into the door Xiaozhu Main CFD Forum 2 August 23, 2002 12:33


All times are GMT -4. The time now is 22:10.