CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Urgent help..

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 6, 2004, 10:41
Default Urgent help..
Posts: n/a
Hi I want to cool bulb withn air flow in ten seconds .(unsteady)(bulb which is cooling by air flow three directions). flow stream is laminar and solver is segregated. this mesage is appeared after some itreation: divergnec detected in AMG solver :X-momentom regard . Amir .
  Reply With Quote

Old   June 8, 2004, 20:13
Default Re: Urgent help..
Tim P.
Posts: n/a
I had that message the other day. I was examining flow (laminar, segregated, unsteady) around/though a porous medium and got that same message. I then tried starting out with very basic settings and working my way up to the values/properties I wanted.

For my specific case: I changed my porous medium to a solid and interface BC to walls, I found that that worked, then I changed my interface BC back to interface and changed the porous medium to a liquid. It continued to work then I changed the porous medium into a porous medium and I gradually increased the Resistance through the medium, and everything worked. I then tried re-initialize and ran the simulation and everything worked!

Perhaps, I had overlooked something when I first set everything up and caught it when I tried a basic approach and worked my way back up. I don't know, I'm just happy it worked.

Hope you find the problem,

  Reply With Quote

Old   June 11, 2004, 17:13
Default Re: Urgent help..
Posts: n/a
Hey I also get this kind of AMG grid error. I am working on Modelling of bubble break up and coalescence. Could any one of u let me know why does AMG error pop up? Podila
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Urgent - Polyflow - particle tracking visualization -Urgent shafaatht ANSYS 0 October 13, 2010 04:56
Urgent, Urgent, a UDF problem, PLEASE HELP!!! Max FLUENT 1 September 24, 2010 20:30
Urgent...urgent...plss!!! astronome FLUENT 0 October 16, 2009 07:17
tmerge urgent urgent jessica FLUENT 4 July 15, 2006 13:37
very urgent pleasade:Cl and Cd values for airfoil Liaquat FLUENT 2 April 27, 2006 12:20

All times are GMT -4. The time now is 23:16.