|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
Hello,
I used ICEM for a long time but I am new to Gambit and Fluent. I just wonder how I can import the mesh generate by ICEM into Fluent 6. By the way, I generated the mesh using ICEM on Windows system while Fluent 6 is running on IBM AIX system. Is it possible to import the mesh into Fluent? Thanks, Fluent Beginner |
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
Yes it is. When you open Fluent just open the mesh file and it will open in Fluent. This is how I open mesh files created in Gambit.
|
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Thanks Bob. But I am still not sure how to import the mesh into Fluent. Follow is the operation I conducted:
1. Start Fluent located on AIX system by SSH from Linux system: ssh userid@server 2. Click File->Import in Fluent program But I can not find ICEM option. We have ANSYS, CGNS, FIDAP, GAMBIT, IDEAS, Nastran, Patran, Fluent 4 Case, PreBFC, Partition. Could you please explain it in more detail? THanks, Fluent Beginner |
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
You don't go to file-> import. You go start to the file-> open. Open the mesh file as if you were opening a regular fluent case file.
|
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
Thanks, Bob.
|
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
Dear fluent beginner,
I have seen ur id from cfd online website. I am working in gas turbine combustor. I am using gambit as my preprocessor. my geometry consists of many holes(dome holes(670 in no.,flare holes(790 in no.) etc) Meshing those volumes which contains this holes is becoming difficult. Some volumes i could able to mesh. But some other volumes it is telling gap in face meshing is more. Because of this i am trying the same geometry in ICEM CFD SOFTWARE(just started learning). I heard that meshing difficulties won't be there in icem cfd software. Is it a good idea or what should i do.If u can help me in this regard i will be grateful. thankyou jyothish |
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Commercial meshers] icem fluent mesh with cyclic boundary condition | jiejie | OpenFOAM Meshing & Mesh Conversion | 2 | February 24, 2020 03:34 |
[ICEM] Export unstructured periodic mesh from ICEM CFD to Fluent | ivanddd | ANSYS Meshing & Geometry | 1 | February 3, 2011 00:51 |
Import Fluent Mesh and Boundary Conditions | BTU-RoRo | CFX | 3 | July 23, 2010 14:20 |
mesh missing after import in fluent | morteza08 | FLUENT | 0 | July 23, 2010 02:22 |
Fluent error after import case from ICEM | Lord Firestorm | FLUENT | 1 | June 19, 2008 16:50 |