CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Heat Transfer&boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 28, 2004, 05:56
Default Heat Transfer&boundary condition
  #1
Hadi
Guest
 
Posts: n/a
Hi! I need Help. An electric heater works in a room.It's temperature very high. Thickness of room Walls are 30(cm)and in the Outside of the room temperatre is -20(c) what is the Boumdary type of room wall? How can I calculate Heat Flux from Inside of the room to the Outside? thanks
  Reply With Quote

Old   June 28, 2004, 20:37
Default Re: Heat Transfer&boundary condition
  #2
AJ
Guest
 
Posts: n/a
Use convection BC with either htc bc with hemperature or temperature on the wall. First one will be more realistic. From air velocity around the room you know that whether its forced convection or natural convection problem.... Flux can be calculated on any wall by fluent. You have to check whther there is good energy convergence!!!

AJ

  Reply With Quote

Old   July 20, 2004, 06:02
Default Re: Heat Transfer&boundary condition
  #3
Hadi
Guest
 
Posts: n/a
Hi; Thanks AJ because of you'r answer. A fan works in the room,then Fluent should find flow field and temperature field.Then I should apply Thermal Boundary condition to the room walls.Which Boundary condition I should use?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help !!! : Computation/Calculation of Heat flow through several layers of Glazing glazing Main CFD Forum 5 October 12, 2010 07:28
Constant velocity of the material Sas CFX 15 July 13, 2010 09:56
Convective / Conductive Heat Transfer in Hypersonic flows enigma Main CFD Forum 2 November 1, 2009 23:53
Boundary Condition for Heat Transfer wilko OpenFOAM Running, Solving & CFD 0 October 12, 2009 18:58
How to apply heat flux condition L. Zhu FLUENT 2 January 8, 2003 11:16


All times are GMT -4. The time now is 07:25.