CFD Online Logo CFD Online URL
Home > Forums > FLUENT

3D geometry drawing in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 26, 2004, 03:36
Default 3D geometry drawing in gambit
Posts: n/a
hi everybody, as a part of my project study i have to do the performance analysis of a sramjet engine .to draw the geometry in 3D i have been given the vertex data (consisting of roughly 50 pts in 3D) at 64 stations on the body alone. though i could make 64 journal files to import these vertex data and create the geometry.i find it very tedious to connect all the vertices at each station to creates edges ,then connect these edges to make face and then volumes. can anybody suggest me a easier method of doing this. thanks in advance
  Reply With Quote

Old   July 26, 2004, 04:03
Default Re: 3D geometry drawing in gambit
Posts: n/a
hia, I didnt get you. whether you were given with 50pts(x,y,z co-ordiantes)at each station i.e overall 50*64=3200 pts or just 50 pts. If you can send your data to my i.d, i will see what i can do about it.

  Reply With Quote

Old   July 26, 2004, 08:30
Default Re: 3D geometry drawing in gambit
Posts: n/a
Dear Mr. or Miss

From jounal file, It is very difficult to make gambit

3-D geometry, and easy to have error.

I recommend other solution, if you have many compuational domain to analysis.

Please, try to other CAD software like CATIA, PRO-E.

and convert them into neutal CAD file lke IGES or STEP.

You can read them in gambit software.

I think that you should modify the neutral file in gambit because of CAD conversion error.

But it's nothing compare to 3-D geomery creation in gambit.

Try it.

You save more time.

Best regards.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Geometry of Tank and Rushton Turbine in Gambit jawidnaik ANSYS Meshing & Geometry 1 February 4, 2015 08:28
create turbine geometry with gambit badlaine ANSYS Meshing & Geometry 2 March 26, 2012 23:54
What can I employ to create geometry besides Gambit? summer ANSYS Meshing & Geometry 2 February 11, 2011 15:50
Need support for GAMBIT geometry srbbd FLOW-3D 3 March 12, 2009 20:16
problem about Importing geometry in Gambit Hua Gu FLUENT 3 April 2, 2002 14:24

All times are GMT -4. The time now is 01:35.