CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Covert gambit file to polyflow file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 4, 2004, 13:28
Default Covert gambit file to polyflow file
  #1
John
Guest
 
Posts: n/a
Can anyone tell me how to convert the Gambit file to polyflow file? GAmbit end with" .dbs",while polyflow file end with ".msh" & ".dat"

Hope some one can help me out here. Thank A lot
  Reply With Quote

Old   August 5, 2004, 04:12
Default Re: Covert gambit file to polyflow file
  #2
Oliver
Guest
 
Posts: n/a
Hello John,

Instead of saving your gambit geometry try to export it in a .msh format. Before that, you maybe have to specify your solver. Good luck.
  Reply With Quote

Old   August 5, 2004, 06:22
Default Re: Covert gambit file to polyflow file
  #3
John
Guest
 
Posts: n/a
I already specify the solver for POLYFLOW in gambit before i do modelling & meshing.

I do the samething as the gambit tutorial do.

But it export Neutral format file("xxx.neu") Hope someone can give advise again.
  Reply With Quote

Old   August 5, 2004, 08:26
Default Re: Covert gambit file to polyflow file
  #4
Thierry
Guest
 
Posts: n/a
If you are using POLYMAN, in the tool menu, there is an option Convert a Gambit Neutral file (i.e. the xxx.neu file.

If you are not using POLYMAN, in the main menu of POLYDATA, there is an option Convert a mesh file under which you can find the option Convert a Gambit Neutral file.

Both ways will create the xxx.msh file.

  Reply With Quote

Old   August 5, 2004, 10:38
Default Re: Covert gambit file to polyflow file
  #5
John
Guest
 
Posts: n/a
Thank a lot to you guy.

I get it now. but new problem come out after solve this problem.

when i open the .msh file with polydata, it show message "Unable to create the skeleton of the mesh. At least 2 boundaries per sub-domain are needed!"

i still able to see the 3-D model in polydata.

CAn anyone give advise?? why can not create mesh?
  Reply With Quote

Old   August 6, 2004, 09:31
Default Re: Covert gambit file to polyflow file
  #6
Thierry
Guest
 
Posts: n/a
You did not define the boundaries in Gambit. Refer to the Users GUide and Example manuals if you don't know how to do it.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM.com] OpenFOAM 1.7.1 installation on LINUX UBUNTU 10.10 electrosin OpenFOAM Installation 40 May 31, 2016 06:11
1.7.x Environment Variables on Linux 10.04 rasma OpenFOAM Installation 9 July 30, 2010 05:43
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
[Gmsh] Compiling gmshFoam with OpenFOAM-1.5 BlGene OpenFOAM Meshing & Mesh Conversion 10 August 6, 2009 05:26
[OpenFOAM] Paraview command not found hardy ParaView 7 September 18, 2008 05:59


All times are GMT -4. The time now is 07:13.