problem in giving b.c -- CFD Online Discussion Forums

August 10, 2004, 04:21	problem in giving b.c	#1
kiran Guest Posts: n/a	hi users, I am having a problem in intialising the iteration.While giving the b.c i found two velocity inlet condition .one b.c is due to beam sea condition of the ship that is perpendicular to the body and other due to movement of the ship relative to the water which is along the body.I am incorporating beam sea condition as it is severe case for roll motion.i am intending to calculate the lift coefficient on the fins which try to reduce the roll motion.I would like to know which of the given boundaries are to be initialised for iterating.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Handling cyclic BC from gambit to openfoam for a cascade airfoil problem - OF 1.6	maverick	OpenFOAM Meshing & Mesh Conversion	2	June 18, 2011 04:36
Velocity profiles problem behind the elbow (3D problem)	kabat73	FLUENT	8	May 9, 2010 04:26
Mesh problem	tuks	CFX	4	May 18, 2005 14:07
Problem in giving heat source	Sireesha	FLUENT	1	July 10, 2004 17:54
UDF 3D inlet b.c. problem	Andrew	FLUENT	4	May 25, 2004 04:24

All times are GMT -4. The time now is 16:36.