Display Coordinates On Simulation Results
Hi,
Any one knows how to add coordinates to Fluent simulation results when displaying them? Thanks for your time and kind help in advance Colin |
Re: Display Coordinates On Simulation Results
Hi, If I understood you correctly, i think you can use the Text Command List in Fluent to implement it. Check the Text Command List help about it, i hope it will be useful.
Lior. |
Re: Display Coordinates On Simulation Results
Hi, Thanks Lior,
Yes, I just want to add the coordinates to the simulaiton results. And I wonder if I could magnify or reduce the Fluent image and the added coordinates at the same time? Thanks for your time and kind response again. Colin |
Re: Display Coordinates On Simulation Results
Hi,
Again, I am not so familiar with the Text command either, but i believe it can be done with it. I used it myself a few times, to scale and magnify the axes and the captions... Browse the Fluent help and read about it. Lior. |
Re: Display Coordinates On Simulation Results
Thanks, Lior,
Yes, I did add measure markings to the contours using Fluent. But the measure markings are too coarse to accurately study the images. Fluent staff said the markings couldnot be refined further by Fluent. What I am thinking now is to see if I could use other softwares to reach my goal. Thanks again, Lior. Your time and suggestions are highly appreciated. Colin |
All times are GMT -4. The time now is 00:24. |